Making this ping pong ball dildo is about as simple as toy making gets. At least without just grabbing something and going at it. The one that I made took about minutes. What you will need to make this: Ping pong balls Electrical tape A pair of scissors or sharp knife That is it. Step 1 - Lay out a strip of the tape long enough to hold your ping pong balls side by side. You can make it as long as you wish, but do keep it realistic just for your body's health. Step 2 - Lay the ping pong balls side by side on the tape, pressing down slightly to tack them in place.
Step 3 - Take another strip of tape, the same length as the first, and lay it along the top. Press firmly into place. At this point you will have to decide if you want the toy to be stiff or to have some flex. Pushing the balls close together ouch, sounds painful while taping will result in a stiff toy. Whereas leaving them some room will allow a little flex later. Step 4 - Use some strips of tape to cover one end, you should not be able to see any white or whatever color ball you are using.
The end you just covered will be the end inserted when the fun begins. Step 5 - Starting at the first ball at about halfway start winding the tape around your toy. Overlap the tape consistently to make it look better. Wrap the entire length with the tape. The other end will be kind of a pain as it will want to wrinkle. That is okay, let it as it makes sort of base for the toy.
You can pretty it up if you are patient and wrap carefully. If you are wanting a little flex to your toy, be very gentle with the wrapping stage. You just want a consistent coating here.
The reason for care is as you are wrapping, if you pull tight you are actually cinching the tape along the sides.
Pulling the balls closer together and locking them in place. For flex in the finished toy you have to find the happy medium of enough force to hold it together well, and a looser even wrap. Picture of long dildo I took advantage of my two packages of ping pong balls, making one travel size dildo not pictured here, it only consists of four ping pong balls , and one long dildo to use around the house. Now we are ready to play no matter where we are. Wash the new toy with warm water and soap.
And to add an extra layer of safety use a condom on your toy. The tape can peel at the edges and harbor bacteria, a condom is always suggested with homemade toys of any kind.